Audix SCX1

4.045,00 DKK

PROFESSIONAL STUDIO CARIDOID CONDENSER MICROPHONE

High quality recording and sound microphone for piano, acoustic instruments and overheads. All brass construction. Clip, Windscreen. Requires 48-52 V phantom power. Cardioid 40 Hz – 20 kHz

Beskrivelse

The SCX1 is a professional studio cardioid condenser microphone designed for a wide variety of recording, broadcast and live sound applications. Known for its high sensitivity, pin-point accuracy, low profile and consistency, the SCX1 is also available with hypercardioid (model SCX1HC) or omni-directional (model SCX1O) capsules.

With a smooth uniform frequency response from 40 Hz – 20 kHz, the SCX1 is very consistent when responding to on and off-axis signals, and exhibits excellent phase coherence and minimal proximity effect. The SCX1 is characterized with a wide cardioid polar pattern; this, coupled with the high output and sensitivity of the microphone, makes the SCX1 an ideal choice for miking overhead, drums, instruments, room ambience, orchestral sections, stringed instruments, piano, vibes and sound effects. The SCX1HC condenser microphone is a number one choice for miking hi-hat both live and in the studio.

 

Other features include a 21 mm gold vapor capsule, miniaturized electronics and an extremely small footprint. The SCX1 will handle sound pressure levels of 130 dB and will provide up to 20 dB of ambient noise rejection. In addition to acoustic instruments, the SCX1 is an excellent choice for group vocals, speech or Foley work. The SCX1HC has become a popular choice for interior dialogue boom pole miking. It has a precision machined brass body, interchangeable capsules, black multi-layer class ‘A’ liquid finish and gold plated XLR connector. The SCX1 studio condenser microphone is manufactured to exacting standards and tight tolerances.

 

What’s In The Box

  • 1 x SCX1 Studio Condenser Microphone
  • 1 x CASEWOOD Foam Lined Wooden Case
  • 1 x DCLIP Microphone Clip
  • 1 x WS81C External Windscreen

Specifications

Transducer Type Condenser
Frequency Response 40 Hz – 20 kHz
Polar Pattern Cardioid / Hypercardioid / Omni
Output Impedance 200 ohms
Sensitivity 26 (C) | 17 (HC) | 15 (O) mV / Pa @ 1k
Equivalent Noise Level 14 dB (A-weighted)
Signal to Noise Ratio 80 dB
Maximum SPL ≥130 dB
Dynamic Range 116 dB
Power Requirements 48-52 V phantom
Connector 3-pin XLRm
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Materials / Finish Machined Brass / Black Finish
Weight 114 g / 4 oz
Length 104 mm / 4.1 in

 

Anmeldelser

Der er endnu ikke nogle anmeldelser.

Kun kunder, der er logget ind og har købt denne vare, kan skrive en anmeldelse.