Focal Sub6 Be

9.199,00 kr.

11″ SUBWOOFER

The Sub6 is a large volume cabinet design, equipped with an 11″ woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL.
The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE.

Kategorier: ,

Beskrivelse

The Sub6 is a large volume cabinet design, equipped with an 11″ woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL.
The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE.

The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.

onnectivity
FOR OPTIMAL INTEGRATION

The Sub6 monitor loudspeaker was developed to perfectly complement the acoustics of Focal monitoring loudspeakers. It features numerous settings such as a stereo high-pass crossover (75Hz – 100Hz) specific to left and right loudspeakers, a configurable low-pass filter with mono summation, a phase inverter, adjustable phase and even a MUTE switch. The various connectivity options enable use in 2.1, 2.2 and multi-channel modes, via the L/R inputs and outputs, and the LFE input.

Footswitch
THE ‘LITTLE EXTRA’ WHICH MAKES THE DIFFERENCE

A major advantage of the Sub6 is its footswitch input. This allows you to connect a footswitch which cuts off the subwoofer and deactivates the high-pass crossovers on the outputs powering the monitors. The footswitch input enables you to compare the sound of a 2.1 set-up (Sub6 filtered + monitors filtered by the Sub6) with that of a 2.0 set-up (subwoofer deactivated + monitors in wideband mode). The two versions can be compared instantly, simply by pressing the footswitch: you barely have to move a muscle.

SPECS:
Frequency response : 30Hz – 250Hz
Maximum SPL : 116dB SPL (peak @ 1m)
Input : Right, left, LFE
Electronically balanced, 10 kOhms
XLR 3 points socket
Adjustable
Outputs (towards speakers) : Type/Impedance: Electronically balanced / 50 Ohms – Connector: XLR 3 points plug
Amplification : 350W rms, BASH® technology
Signal internal treatment : Subwoofer section: Mono right/left summation
LFE + mono low-pass
24dB/octave
Phase adjustment
Polarity selection switch
Switch high-pass filter, cut-off frequency selection
Speaker section : 24 dB / octave
Electric supply : Local supply wire: 230V (1.6A fuse)
or 115V (3.5A fuse)
Connection: removable IEC supply wire
Visualization and control : Adjustable subwoofer level
Low-pass cut-off frequency setting
Phase adjustment
Polarity adjustment
Subwoofer switch (mute)
2.1 “Bypass” (external remote contol)
High-pass frequency selection
Releasable high-pass
warning light : Power on LED, Subwoofer switch (mute), Released high-pass
Subwoofer : 11W7670, 10-5/8″ (27cm) Focal “W” composite sandwich cone driver
Box : 7-1/2″ (19mm) MDF panels
Finish : Dark red natural veneering side panels, black body.
Dimensions (HxWxD) : 380 x 344 x 440mm
Weight : 23kg
DOCUMENTATION

Anmeldelser

Der er endnu ikke nogle anmeldelser.

Kun kunder, der er logget ind og har købt denne vare, kan skrive en anmeldelse.