The ADX20i miniature condenser microphone is applicable for professional stage and studio applications. This microphone is primarily used for miking most reed and brass instruments.
The ADX20i has a uniformly controlled cardioid polar pattern, which provides excellent isolation and feedback control on stage with natural sound reproduction at very close distances.
The ADX20i condenser instrument microphone is lightweight, compact and simple to use. Included with the ADX20i is a gooseneck clip with spring tension for easy mounting to the bell of an instrument.
– Trombone, trumpet
– Room ambience, recording
What’s In The Box
- 1 x ADX20i Instrument Microphone
- 1 x MC20i Microphone Clip
- 1 x WS20 External Windscreen
- 1 x P1 Carrying Pouch
|Transducer Type||Pre-Polarized Condenser|
|Frequency Response||40 Hz – 20 kHz|
|Output Impedance||250 ohms|
|Sensitivity||Cardioid – 6 mV / Pa @ 1k Hypercardioid – 5.6 mV / Pa @1k|
|Equivalent Noise Level||<29 dB (A-weighted)|
|Signal to Noise Ratio||>65 dB|
|Maximum SPL||≥135 dB|
|Power Requirements||9-52 V phantom|
|Connector||Shielded 6’ terminating to a miniature 3 pin XLRf|
|Polarity||Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3|
|Materials / Finish||Machined Brass Capsule / Black Finish|
|Weight||48 g / 1.7 oz|
|Length||29 mm / 1.14 in|